AK System Engineers Private Limited

• Top Push
• Top Loading
• Child Lock
• Hot Normal Cold
• Table Top

• As with most new appliances, it is recommended to clean the reservoir prior to rst time use.
• Make sure the unit is unplugged and power switch is turned off.
• Remove the bottle support funnel, saturate a clean cloth with water dispenser cleaner or vinegar and wipe the inside of the reservoir.
• Pour water dispenser cleaner or a mixture of 0.3 gal / 1 L of vinegar with 0.3 gal / 1 L of hot water into the reservoir and wait 20 minutes.

• Press all dispensing buttons until water no longer comes out.
• Drain the reservoirs from the drain valve on the back of the unit. (in hot & cold unit only)
• Rinse again with clean water.
• Place bottle support funnel back on top of dispenser.

• Always wash your hands rst! Clean the top (neck) of the bottle with a clean cloth and do not touch the part of the unit that the water touches.
• Make sure the unit is unplugged and power switch is in the OFF position.

• Remove the protective cap from the end of the water bottle unless the bottle has a puncturable cap or sticker.
• Lift and turn the bottle upside down, placing it securely on the bottle support funnel
• Press and hold all dispenser buttons until water ???ows from the dispenser.
• Drain about 0.3 gal / 1 L of water before initial use. This does not need to be repeated with replacement bottles.
• Plug in the water dispenser.
• Set the power switch at the rear of the dispenser to the ON position
• Ready-to-dispense indicator lights will come on when water reaches optimum temperatures and is ready for use.

Cleaning And Maintenance:

• Like most appliances, your new water dispenser requires periodic maintenance to operate efficiently. Your water dispenser must be cleaned every 4 months. Please note that as per your warranty, routine maintenance of the dispenser is required. Failure to maintain the water dispenser will void your warranty.

Cleaning Your Water Dispenser:

Important:

• Make sure you turn the power switch to the OFF position and unplug the dispenser before performing any of the following cleaning procedures.

Cleaning The Outside Of The Water Dispenser:

• The outside of the dispenser can be wiped clean with water dispenser cleaning solution or a mild soap and water. Never use harsh chemicals or abrasive cleaners. Rinse thoroughly with clean water and then dry surfaces.

Cleaning The Drip Tray:

• To remove, take the grill off the tray and rmly lift the tray up, dislodging it from the guides. Drain and clean. The drip tray should be emptied and cleaned regularly to remove spotting and any mineral deposits. Clean with water dispenser cleaning solution or a mild soap and water. For tough deposits, add vinegar and let it soak until the deposits come loose. Then wash, rinse and dry thoroughly. To replace, put the grill back on the tray and slide the tray onto the guides.

• Top Push
• Top Loading
• Child Lock
• Hot Normal Cold
• Floor Standing
• Cooling Cabinet

• Compact and contemporary style
• Environmental friendly designs
• Double safety device to prevent overheating
• No electrical connection (in the normal & normal model)

• Hot & Cold
• Normal & Cold
• Hot & Cold with Cabinet
• Table Top Hot & Cold
• Table Top Normal & Cold

Features

• SS 304 Stanless Steel Hot and Cold tank with SS connectors
• Perfect for Institutions, Offices and Corporates
• High Capacity Compressor
• Hardy and Durable

Features

 SS 304 Stainless Steel Hot and Cold tank with SS connectors

 Perfect for Institutions, Offices, and Corporate

 Hardy and Durable

 Make in India

• Large 4-liter cooling tank
• ABS body
• Stainless steel tank
• Fast cooling

• Super
• Frosty
• Big
• Jumbo
• Xtra

• SS 304 Stainless Steel Hot and Cold tank with SS connectors Perfect for Institutions, Offices, and Corporates Hardy and Durable Make in India

• SS 304 Stainless Steel Hot and Cold tank with SS connectors Perfect for Institutions, Offices, and Corporates Hardy and Durable Make in India

• Super
• Frosty
• Big
• Jumbo
• Xtra
• Range available from 2.5 liters to 10 liters PH with up to maximum storage capacity of 13 liters

Features:

• Sleek and elegant look
• Easily replaceable faucets
• Sturdy and Durable

• Double tap
• Easy to install
• Longer life working

• Hotels
• community houses
• Hospitals
• Restaurants

•  Elegant Design
•  Bottled Water Cooler
•  Option for RO / direct water line Compatible
•  20 Liters cold storage capacity
• Adjustable Height